Paradyne 3150 Operator's Manual page 137

Table C-4. User Interface Configuration Options (9 of 10)
3150-A2-GB24-10
MoDiscTm: 5
Next Up Down Save
Modem Port Disconnect Time. Specifies the period of time (1 to 60 minutes) before the
modem port disconnects due to inactivity. (The MoInActTm configuration option must be
set to Enab.) Use the left or right arrow key to position the cursor on the digit you want to
change. Use the Function keys (Up or Down) to increment or decrement the digit.
–
Up Increments the time delay.
–
Down Decrements the time delay.
–
Save Stores the time delay for use with inactivity disconnects.
NOTE: This configuration option is available on standalone CSUs only.
ENET Use: Ver2
Next 802.3 Ver2 Disab
Ethernet Port Use. Specifies the protocol for the 10BaseT port.
–
802.3 IEEE 802.3 protocol is used for the 10BaseT port.
–
Ver2 Ethernet Version 2 protocol is used for the 10BaseT port.
–
Disab The 10BaseT port is disabled.
NOTE: This configuration option is available on standalone CSUs only.
ENET IP Adr: 000.000.000.000
Next Edit Clear Prev
Ethernet Port IP Address. Specifies the IP address for the 10BaseT port.
–
Edit Allows you to edit or display the IP address for the 10BaseT port.
–
Clear Allows you to clear the IP address for the 10BaseT port. The IP address is set to
000.000.000.000.
NOTE: This configuration option is not displayed if 10BaseT port use (ENET Use) is
disabled. It is available on standalone CSUs only.
ENET NetMask: 000.000.000.000
Next Edit Clear Prev
Subnet Mask for the Ethernet Port. Specifies the subnet mask for the 10BaseT port.
–
Edit Allows you to edit and/or display the subnet mask for the 10BaseT port.
–
Clear Allows you to clear the subnet mask for the 10BaseT port. The subnet mask is set
to 000.000.000.000. If the subnet mask is 000.000.000.000, the IP protocol creates a
default subnet mask based on the class of the IP address (Class A: 255.000.000.000,
Class B: 255.255.000.000, or Class C: 255.255.255.000).
NOTE: This configuration option is not displayed if 10BaseT port use (ENET Use) is
disabled. It is available on standalone CSUs only.
March 2001
Prev
Prev
C. Configuration Options
C-15