5. Security
The inactive interface displays the following message after control has been
released from the previously active interface and another interface has not
become active.
Releasing the Active User Interface
To release the current active user interface, either allow five minutes to elapse
without pressing any key or use the Release command.
Procedure
To use the Release command:
5-6
1: 1 CSU ESF
User I/F idle
F1
F2
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Rel (Release).
Control:
ACO
Rel
F2
F1
The active user interface is released. The message Released appears. No
user interface is active until input is received from a user interface.
March 2001
F3
key until the Ctrl selection
LED
F3
3150-A2-GB24-10