Paradyne 3150 Operator's Manual page 145

Table C-6. General Management Configuration Options (3 of 6)
3150-A2-GB24-10
Access 1: Read
Next Read R/W Prev
Access 1. Specifies the type of access allowed for Community Name 1. This is the type of
access allowed for external SNMP managers accessing objects in the MIB using
Community Name 1.
–
Read Allows read-only access (SNMP Get) to the accessible objects in the MIB for this
device when community name 1 is used. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
–
R/W Allows read and write access (SNMP Get and Set) to the objects in the MIB for this
device when community name 1 is used. Write access is allowed for all objects specified
as read/write in the MIB RFCs. Read access is allowed for all objects specified as either
read-only or read/write.
CommunityName2:
Next Edit Clear Prev
Community Name 2. Specifies the second of two community names that are allowed to
access this unit's Management Information Base (MIB). External SNMP managers must
supply this name to access an object in the MIB.
–
Edit Allows you to edit or display the second community name.
–
Clear Allows you to clear the second community name.
Access 2: Read
Next Read R/W Prev
Access 2. Specifies the type of access allowed for Community Name 2. This is the type of
access allowed for external SNMP managers accessing objects in the MIB using
Community Name 2.
–
Read Allows read-only access (SNMP Get) to the accessible objects in the MIB for this
device when community name 2 is used. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
–
R/W Allows read and write access (SNMP Get and Set) to the objects in the MIB for this
device when community name 2 is used. Write access is allowed for all objects specified
as read/write in the MIB RFCs. Read access is allowed for all objects specified as either
read-only or read/write.
IP Adr:
Next Edit Clear Prev
IP Address for the CSU. Specifies the IP address needed to access the CSU. Since this
IP Address is not bound to a particular port, it can be used for remote access via the FDL
management link.
–
Edit Allows you to edit and/or display the IP address for the CSU.
–
Clear Allows you to clear the IP address for the CSU. The IP address is set to
000.000.000.000.
March 2001
C. Configuration Options
C-23