Paradyne 3150 Operator's Manual page 179

ICMP Group, MIB II
The ICMP Group objects are fully supported by the CSU.
TCP Group, MIB II
The TCP Group objects are fully supported by the DSU/CSU, with the exception of
the tcpConnState object, which will be read-only.
UDP Group, MIB II
The User Datagram Protocol (UDP) Group objects are fully supported by the CSU.
Transmission Group, MIB II
Objects in the transmission group are supported on the network and DTE
interfaces, the COM port, and the MODEM port. The objects in the transmission
group are not defined within MIB II, but rather through other Internet standard MIB
definitions. The following two transmission group objects are supported by the
CSU.
T
T
The "ds1" transmission object is defined by the DS1/E1 MIB. The rs232
transmission object is defined by the RS-232-like MIB.
SNMP Group, MIB II
The SNMP Group objects that apply to a management agent are fully supported
by the CSU. The following objects apply only to an NMS and return a zero value if
accessed.
T
T
T
T
T
T
T
T
T
T
3150-A2-GB24-10
ds1 (transmission 18) – The transmission object supported on the T1
interfaces.
rs232 (transmission 33) – The transmission object supported on the COM port
and MODEM port.
snmpInTooBigs (snmp 8)
snmpInNoSuchNames (snmp 9)
snmpInBadValues (snmp 10)
snmpInReadOnlys (snmp 11)
snmpInGenErrs (snmp 12)
snmpInGetResponses (snmp 18)
snmpInTraps (snmp19)
snmpOutGetRequests (snmp 25)
snmpOutGetNexts (snmp 26)
snmpOutSetRequests (snmp 27)
March 2001
F. SNMP MIB Objects
F-11