Paradyne 3150 Operator's Manual page 88

7. Monitoring and Troubleshooting
Device Health and Status Messages
Use the Device Health and Status branch to view the current health and status
messages for the CSU.
messages.
Procedure
To display device health and status:
7-4
Table 7-2, Health and Status
1. From the top-level menu screen, select Stat.
2. From the Status screen, select DevHS.
Status:
DevHS STest
F1 F2
Alarm/status messages appear on Line 2 of the LCD in priority order (highest
to lowest). The CSU is polled for current status every ten seconds. If the status
has changed from the last poll, the Health and Status screen is updated and
the highest priority message is displayed.
3. Use the scroll keys, if necessary, to scroll additional device health and status
messages onto the LCD.
Device H/S:
OOF at DTE
F2
F1
The Auto Device Health and Status screen appears when there is no activity
(no keys pressed) on the active physical interface for five minutes. Only the
highest priority message appears on Line 2 of the LCD.
Auto Dev H/S
OOF at DTE
F1 F2
March 2001
Messages, lists these
Perf
F3
F3
F3
3150-A2-GB24-10