Paradyne 3150 Operator's Manual page 68

5. Security
Establishing Access Security on a Port
Although the password feature is available, it is not required as a factory default. If
used, it ensures access security before device control is passed to a device
connected to a port. The password configuration option can be individually set for
the COM or MODEM port, or both if security is needed on both port types. The
default is None. The password itself is set separately (refer to the following
section,
Procedure
To establish access security on a port:
5-2
Setting a Password
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. Press the key until User is displayed. Select User.
Edit:
NET Gen
F2
F1
5. Press F1 (Next) until the Password configuration option appears.
6. Select port(s) to receive access security (None, Com, Modem, or Both). Use
the scroll keys, if necessary.
Password:None
Next None
F1 F2
March 2001
on page 5-3).
User
F3
Com
F3
3150-A2-GB24-10