Management Configuration Options - Paradyne 3150 Operator's Manual

Management Configuration Options

The Management configuration options are divided into two tables as follows:
T
T
Table C-6. General Management Configuration Options (1 of 6)
3150-A2-GB24-10
General Management Configuration Options
Management Trap Configuration Options
NOTE:
A circular symbol ( ) identifies configuration options that are available on
standalone CSUs only. A triangular symbol ( ) identifies configuration options
that are available on carrier-mounted CSUs only.
SNMP Mgt: Disab
Next Enab Disab Prev
SNMP Management Enable. Specifies whether the CSU responds to SNMP session
requests.
–
Enab The CSU responds to SNMP session requests.
–
Disab The CSU does not respond to SNMP session requests.
NMS Valid: Disab
Next Enab Disab Prev
NMS IP Validation. Specifies whether the CSU validates (for security reasons) the IP
address of an SNMP manager attempting to access the CSU. Allowable addresses are
specified using the NMS n IP Adr configuration option.
–
Enab The CSU validates the IP address of SNMP management systems attempting to
access the CSU.
–
Disab The CSU does not validate the IP address of SNMP management systems.
Num Sec Mgrs: 1
Next 1 2 3 4 5
Number of Security Managers. Specifies the number of SNMP managers that are allowed
to access the CSU.
NOTE: You must configure an IP address for each SNMP manager that is allowed
access to the CSU. Allowable addresses are specified using the NMS n IP Adr
configuration option.
NMS n IP Adr:
Next Edit Clear Prev
NMS Manager n IP Address. Specifies the allowable IP address of an SNMP manager
attempting to access the CSU. The manager number ( n ) is specified by the Num Sec
Mgrs configuration option.
–
Edit Allows you to edit and/or display the allowable IP address for the SNMP manager.
–
Clear Allows you to clear the allowable IP address for the SNMP manager. The IP
address is set to 000.000.000.000.
March 2001
(Table
(Table C-7)
6 7 8 9 10 Prev
C. Configuration Options
C-6)
C-21