Paradyne 3150 Operator's Manual page 149

Table C-7. Management Trap Configuration Options (1 of 3)
3150-A2-GB24-10
Num Trap Mgrs: 1
Next 1 2 3 4 5
Number of Trap Managers. Specifies the number of SNMP trap managers that are to
receive traps for this unit.
NOTE: You must configure an IP address for each trap manager that is to receive trap
messages.
Trap n IP Adr:
Next Edit Clear Prev
Trap n IP Address. Specifies the IP address for each trap manager. This configuration
option is repeated for all trap managers supported by the unit.
–
Edit Allows you to edit or display the IP address for Trap Manager n .
–
Allows you to clear the IP address for Trap Manager n . The IP address is set to
Clear
000.000.000.000.
Trap n Dst: None
Next None IPBus ENET
Trap Manager n Destination. Specifies the network destination for Trap Manager n . This
configuration option is displayed for the number of trap managers ( n ) specified by the
Number of Trap Managers configuration option.
–
None No Trap Manager n network destination. Traps are discarded.
–
IPBus The Trap Manager n network destination is the IP Bus on the carrier backplane.
This selection appears only for carrier-mounted CSUs which are not configured as the IP
Bus Master.
–
ENET The Trap Manager n network destination is the 10BaseT port. This selection
appears only for standalone CSUs.
– The Trap Manager n network destination is the communication port. This selection
Com
appears only if the Com Use configuration option is set to Mgmt.
–
Modem The Trap Manager n network destination is the modem port. This selection
appears only if the Modem Use configuration option is set to Mgmt. This selection does
not appear on carrier-mounted CSUs.
–
FDL The Trap Manager n network destination is the FDL management link. This
selection appears only if the FDL management link is enabled.
NOTE: If the chosen destination link is disabled or down, the traps are discarded.
Return to this menu and choose another destination.
March 2001
6 Prev
Com Modem FDL
C. Configuration Options
Prev
C-27