Paradyne 3150 Operator's Manual page 54

4. Configuration
10. When you are through changing the IP address, you must press F3 (Save) to
The subnet mask associated with the COM port or MODEM port IP address is set
automatically according to the class of the IP address. If the default mask is not
suitable, select Gen from the Mgmt Config screen and scroll to COM NetMask or
Mdm NetMask to change it.
4-14
NOTE:
Steps 8 and 9 describe the process for entering an IP address. This
process applies to any IP address.
8. Press F2 (Edit) to edit the IP address. You have the option of using F3 (Clear)
to reset the IP address to the factory default 000.000.000.000 .
Com IP Adr:
Next Edit
F1 F2
9. Use the and keys to position the cursor under the digit you want to
change. Press F1 (Up) to increment the digit or F2 (Down) to decrement the
digit. In this example, you would press
middle digit in the first digit field, then press F1 (Up) once to change the 0 to
a 1. Continue in this manner to change the other digits.
000.000.000.000
Up Down
F2
F1
save the value. Otherwise, the original value will be retained.
010.155.111.222
Up Down
F2
F1
March 2001
Clear
F3
once to place the cursor under the
Save
F3
Save
F3
3150-A2-GB24-10