Table of Contents
Advertisement
HOT SHOT DIVIDER KIT SETUP
The Divider Kit will arrive either on it's own pallet or attached to a game pallet. Please inspect for
shipping damage and report immediately to the freight company if any damage found.
Tools Needed:
Phillips head screwdriver bit
Important:
Portions of this game are heavy, bulky and large. Assembly requires 1 - 2 people to lift heavy
components, and ladders that are tall and strong enough to position components to the top of the
game.
Instructions:
Well, the good news is that the hard parts are done!
You've got 2 games all set up - leave about 18" from game
wood wall to game wood wall to allow for the kit to be installed.
Note: 2 linked games with a divider dimensions:
Install Lower Side Brackets:
- Locate 2 of Lower Side Brackets (A5ME22018)
- Loosen the 6 bolts on the right side of the left game using a # 2
square bit. The metal bracket will slide under these bolts.
Width: 11' 7"
/ 353 cm
Depth: 13" 7" / 414 cm
Height: 13" 5" / 409 cm
# 2 Square head screwdriver bit
69
1 - 2 people
Advertisement
Table of Contents
