Bay-Tek HOT SHOT FREE THROW FURY Manual page 31

Install the Front Support Bracket:
- Locate the Front Support Bracket.
- Locate 4 of bolts (A5SCHH007) and 4 nuts (A5NULO050) from the
hardware kit.
- Using 2 people, carefully bring the Front Support Bracket to the top front of game.
- Install the 4 bolts (A5SCHH007) from the Front
Support Bracket into the front side net. Thread on the
5 nuts (A5NULO050). Tighten using a 5/32 hex bit.
Install Ball Release Assembly:
- Locate the Ball Release Assy inside the front door.
- Locate 5 of bolts (A5BOBH030) from the hardware kit.
- Place Ball Release Assy in position under the ball gate, in-
stall 5 bolts and tighten using a 5/32 hex bit.
- Remove the cotter pin, plastic spacers,
and pin from Ball Release Assy
- Install the same cotter pin, plastic spac-
ers, and pin also including the arm
from the ball gate.
The complete assembly.
A5BOBH030
31
A5SCHH007 A5NULO050