Bay-Tek HOT SHOT FREE THROW FURY Manual page 38

- Install 2 of bolts (A5SCHH007) into the 2 top holes in the left
side LED panel.
- Install 2 nuts (A5NULO050) onto the back side
of these 2 bolts.
- Tighten using a 5/32 hex bit.
Repeat the process for the right side LED panel:
- Locate 2 of bolts (A5SCHH007) and 2 nuts (A5NULO050) from the
hardware kit.
- Locate 5 black bolts (A5BOPH312) from the hardware kit.
- Bring the right side LED Panel up onto the right side of the front console.
- Plug in the LED cable to the main cabinet harness.
- Install 3 black bolts (A5BOPH312) into the side holes. Tighten using a # 2 square bit.
- Install 2 black bolts (A5BOPH312) into the bottom mounting flange. Tighten using a # 2 square bit.
- Install 2 of bolts (A5SCHH007) and 2 nuts (A5NULO050) into the 2 top holes in the left side LED
panel. Tighten using a 5/32 hex bit.
CE22039 to CE22037
38
A5SCHH007 A5NULO050
A5BOPH312