Table of Contents
Advertisement
While we have done extensive testing on non-Bay-Tek product, it is impossible for us to have tested every
game. Should Evolve not work with a game, please contact our Service First Network for assistance.
MOUNTING:
Remove the 4 screws holding the back plate
onto the Evolve box, then slide the back plate
out of the grooves.
Place the back plate against the game cabinet
in the desired location.
Location varies from game to game, so make
sure the Evolve box won't prevent any doors
from opening and that it won't become an injury
hazard.
Mark 2-4 of the holes in the back plate onto
the cabinet, and drill out with a 3/16" drill bit.
You may also need to make a 1.5" hole for the
cables to go through.
Insert the included carriage bolts through the
back plate and the cabinet, securing inside
the game with washers and lock nuts.
Hang the box onto the back plate and replace
the 4 screws to secure them together.
INSTALLATION GUIDE
NOTICE:
ALWAYS TEST THE EVOLVE UNIT BEFORE
PERMANENTLY ATTACHING IT TO THE GAME.
8
Advertisement
Table of Contents
