Bay-Tek HOT SHOT FREE THROW FURY Manual page 30

- Plug the 22033 cable into the CE22024 cable.
- Plug the 22034 cable into the CE22024 & CE22025 cables.
The yellow sockets plug together and the single wire
connectors plug together.
- Install the 6 Wire Saddles into the holes in the
back of the cabinet, and route the cables to the
right and down the cabinet as shown.
The cables will clip into the Wire Saddles to keep
them secure.
- Route the 3 cables up and
through the slots in the
Ramp Braces.
- Bring the 3 cables to the
front of the cabinet through
these holes in the Ramp
Braces.
- The cabinet can now be pushed back to it's final game position.
We recommend that space is left behind the game for future access to game components.
30