Bay-Tek HOT SHOT FREE THROW FURY Manual page 71

- Install the Divider Support Brace as shown with 1 bolt and
nut on each end in the 3rd hole from the bottom, and tighten
using a # 2 square bit.
The games may have to be moved left or right to
accommodate this bracket.
- Locate 1 Divider Cross Brace (A5ME22021)
- Locate 4 of bolts ((A5BOPH312) and 4 nuts (A5NULO050)
from the hardware kit.
- Install the Divider Cross Brace as shown with 2 bolts and nuts on
each end and tighten using a # 2 square bit.
- Locate Lower Plexi.
- Locate 10 of bolts (A5BOPH312) and 10 nuts
(A5NULO050) from the hardware kit.
A5BOPH312
A5NULO050
71
A5NULO050
A5BOPH312