Bay-Tek HOT SHOT FREE THROW FURY Manual page 25

- Locate 4 black bolts from the hardware kit.
A5BOPH312
- Carefully climb inside the cabinet and hand thread
these 4 bolts into the right side to secure the rear panel
as shown. Tighten using a # 2 square bit.
Repeat the process for the left side of the cabinet
- Locate 4 black bolts from the hardware kit.
- Hand thread into the left side to secure the rear panel.
Tighten using a # 2 square bit.
2 Roof Panels will now be installed on top of the side
nets:
- Locate 2 Roof Panel boards previously removed from box.
- Locate 8 black bolts from the hardware kit.
- Install the 2 Roof Panels on top of side nets.
Ensure T-Nuts are on top of board.
- Hand thread 2 bolts into each side of each Roof Panel.
(It's best to keep the T Molding splice toward the back of the
game)
- Tighten all bolts using a # 2 square bit.
A5BOPH312
25