Bay-Tek HOT SHOT FREE THROW FURY Manual page 9

- Remove the 4 Floor Supports (D) part # A5ME22006
from giant heavy box and place near the assembly area.
- Remove the Back Wall Splice from giant heavy box
and place near the assembly area.
- Remove the 2 packages of Leg Supports (G) part #
A5ME22009 from giant heavy box and place near the
assembly area.
Everything else in the giant heavy box can now be
removed and placed a bit further away for later use.
The now giant light box can be removed from the pallet.
- Remove the wood bracing to access the Rear Side Wall
using a # 2 square bit.
- Remove the Rear Side Wall from the pallet
and place in the assembly area as shown.
Note: The arrow on the wood point toward the
rear of the game.
9