Bay-Tek HOT SHOT FREE THROW FURY Manual page 20

- Locate 1 Leg Support (G) part # A5ME22009
- Locate 4 bolts from the hardware kit.
- Place the Leg Support into position as shown
(It's best to keep the open end toward the back of the game) and
secure using these 4 black bolts using a 5/32 hex bit.
- Locate the Ball Gate Platform previously
removed from the pallet.
- Using 2 people, bring Ball Gate Platform into the cabinet as
shown, with the ball gate toward the front of the cabinet.
- The wood underneath the Ball Gate Platform
must slide into the slots on the side walls and
drop fully so that the top is flush with the middle
section.
- Locate 8 of black 10's
(A5SCPH152) from the hardware kit.
- Install the 8 black 10's (A5SCPH152) using
a # 2 square bit into the L brackets
- Locate and unwrap 2 Floor Supports (D) part # A5ME22006.
- Locate 16 of black 10's (A5SCPH152) from
the hardware kit.
- Place 1 of the red metal floor supports under each side of the
cabinet. The bracket will support the ends of the floor boards as
they come together.
Note: The gap between the floor boards is normal, it will be cov-
ered with flooring.
- Install the 16 black 10's (A5SCPH152) using a # 2 square bit.
(8 per bracket)
A5SCHH007
A5SCPH152
A5SCPH152
20