Bay-Tek HOT SHOT FREE THROW FURY Manual page 73

- Locate 2 of the Divider Cross Braces (A5ME22021)
- Locate 12 of bolts (A5BOPH312) and 12 nuts (A5NULO050) from
the hardware kit.
- Position the divider cross brace on the short side of
the top plexi. Install 6 of the bolts and nuts into the top
plexi as shown.
Tighten using a # 2 square bit.
- Repeat this process for the other edge of the top
plexi.
Install Top Plexi Assembly:
- Bring the newly completed Top Plexi Assembly
to the game.
- Locate 8 of bolts (A5BOPH312) and 8 nuts (A5NULO050) from
the hardware kit.
- Install the Top Plexi as shown with3 bolts & nuts into each
connection plate on each side,
and 2 bolts and nuts on the bottom mounting flange.
Tighten using a # 2 square bit.
A5NULO050
A5BOPH312
73
A5NULO050
A5BOPH312