Table of Contents
Advertisement
Install Wood Supports:
Wood supports will be installed in the space
between the 2 games.
There are mounting holes underneath the decals
on all games built.
These mounting holes will have to be cut out so
that the wood supports can be bolted in place.
- Locate the 6 cutouts on the right side of the left
game and the left side of the right game.
- Carefully use a knife to cut out the decal to
expose the mounting holes.
- Locate 12 of bolts (A5SCPP025) and 12 washers
(A5WAFL090) from hardware kit.
A5SCPP025
- Locate 4 wood support pieces.
- Hand thread 6 bolts with washers into the wood support
pieces as shown. Tighten with Phillips screwdriver.
A5WAFL090
74
Advertisement
Table of Contents
