Bay-Tek HOT SHOT FREE THROW FURY Manual page 10

Install the Long Rear Legs:
- Unwrap the Long Rear Legs (A) part #
A5ME27520 and place one against the Rear Side
Wall as shown.
- Locate 3 sets of bolts, spilt washers, and
washers from the hardware kit.
- From the back side, hand thread these 3 sets of
bolts, spilt washers, and washers and tighten using
a 9/16" wrench.
- Slide this Rear Side Wall under the Back Wall so that
the Long Rear Leg is under the red bracket
mounted on the back Wall.
Note: Have a 2nd person lift the Back Wall to slide
under and help align the 4 holes for the next step.
- Locate 4 of bolts from the hardware kit.
A5SCHX025
- Hand thread the 4 bolts from the red rail into the
Rear Side Wall and tighten using a 5/32 hex bit.
A5BOHH090
10
A5WALO010
A5WAFL050