Bay-Tek HOT SHOT FREE THROW FURY Manual page 36

Install Ball Gate Cover:
- Locate black plastic ball gate cover.
- Locate 11 of black 10's (A5SCPH152)
from the hardware kit.
- Install the black plastic gate cover by sliding
the 3 notches into the notches in the cabinet.
Slide the cover forward and install the 11
screws (A5SCPH152) into the holes using a
# 2 square bit.
Install Ball Deflectors
- Locate 2 of red metal Ball Deflectors (A5ME22007)
- Locate 6 of black 10's (A5SCPH152)
from the hardware kit.
- Install 1 Ball Deflector on the left side of the cabinet as
shown. The short mounting flange to the rear of cabinet, the
long mounting flange to the front of the cabinet.
- Secure with 6 black 10's (A5SCPH152) using a # 2
square bit.
Repeat the process for the right side:
- Locate 6 of black 10's (A5SCPH152) from the hardware kit.
- Install 1 Ball Deflector on the right side of the cabinet as shown. The
short mounting flange to the rear of cabinet, the long mounting flange to
the front of the cabinet.
- Secure with 6 black 10's (A5SCPH152) using a # 2 square bit.
A5SCPH152
A5SCPH152
36