Bay-Tek HOT SHOT FREE THROW FURY Manual page 45

Scroll through the options by pressing the "Menu Select" button.
Shows the status of the 2 hoop sensors. T is top sensor, B is bottom sensor
Normally, both show "OFF" as they both see the reflection from the tape at
the front of the rim.
They both should blink quickly to "ON" when the ball passes the sensors and they are briefly blocked.
Shows the state of the 2 pushbuttons on the game.
"S" is Left Single Player Button, "V" is Right Versus Head to Head Button
Normally the display will show "OFF" for both buttons. When pressed, the display will change to "ON"
Shows the current state of the ball gate - either UP or DOWN
Press the right Versus Head to Head Button to lower the gate.
Press the left Single Player Button to raise the gate.
When a button is pressed to move the motor, the "M" will change to "ON" until motor stops.
The "S" will flash "OFF" as the sensor is blocked.
Only applicable when 2 games are linked with cable # CE22036P
Both linked games must be in this menu option.
Both "P" and "G" are normally "OFF"
The "P" will change to "ON" when the other games Single Player button is pressed.
The "G" will change to "ON" when the other games Head to Head button is pressed.
Press the "Menu Select" button to cycle from all Red LED's to all Green LED's to all Blue LED's
Press the Single Player button to dispense 1 ticket.
Press the Head to Head button to dispense 10 tickets.
Shows the current software version of the Controller Board, Display Driver Board, and Door Board.
Diagnostics Menu
Exit the menu by pressing the "Menu" button.
Hoops
Game Buttons
Ball Gate
Link Verification
RGB Color
Test Ticket Dispenser
Software Versions
45