Bay-Tek HOT SHOT FREE THROW FURY Manual page 22

- Locate 6 of black 10's (A5SCPH152) from the hardware kit.
- Install the 6 black 10's (A5SCPH152) using
a # 2 square bit into the L brackets
Install the left side cage to the back way the same way:
- Remove a net section from the pallet stack and bring to the left side of the cabinet.
- Locate 3 of bolts (A5SCHH007) and 3 nuts
(A5NULO050) from the hardware kit.
- Using 2 people, bring the net section to the left rear of the cabinet.
- Install the 3 bolts (A5SCHH007) from the front side net into the back wall red metal.
Have the 2nd person behind the game to thread on the 3 nuts (A5NULO050). Tighten
using a 5/32 hex bit.
- Locate 6 of black 10's (A5SCPH152) from the hardware kit.
- Install the 6 black 10's (A5SCPH152) using a # 2 square bit into the L brackets
A5SCPH152
A5SCHH007 A5NULO050
A5SCPH152
22