Bay-Tek HOT SHOT FREE THROW FURY Manual page 13

- Locate 2 Leg Supports (G) part # A5ME22009
- Locate 8 bolts from the hardware kit.
A5SCHH007
- Place the 2 Leg Supports into position as shown
and secure using these 8 black bolts using a 5/32
hex bit.
The assembled cabinet can now be tipped up and moved
closer to final game room position. However, there will
need to be space for a couple ladders behind the cabinet.
- Using 3 - 4 people, carefully tip the cabinet up onto it's
feet as shown.
- Slide the cabinet closer to final game position, but leave
4 feet behind the game for ladders and 2 feet away from
game next to it.
- Locate 8 of 2" bugle screws (A5SCFH060) from the
hardware kit.
- Screw the 8 screws from the top down into the support
braces into the pilot holes locations using a # 2 bit.
A5SCFH060
13