Bay-Tek HOT SHOT FREE THROW FURY Manual page 33

Remove the Front Console from Pallet # 1:
- Remove the 3 of 2X4's on each side of the pallet using a
# 2 square bit.
- Remove card board surrounding Front Console.
- Remove the 4 bolts holding the Front Console to the
pallet using a Torx T-30 bit.
- Remove the 2 LED panels from Front Console and set
aside for later use.
- Using 3-4 people, remove the Front Console from the
pallet and place near the front of the assembled cabinet.
- Connect the 3 cables from the rear of the cabinet to the
cables inside the front console.
CE22032 to CE22004
CE22033 to CE22035
CE22034 to CE22006
- Connect the cable from the Ball Gate cable to the cables
inside the front console.
CE22031 to CE22001
33