Bay-Tek HOT SHOT FREE THROW FURY Manual page 52

HOOP SENSORS & BALL GATE WIRING DIAGRAM
The Top Sensor
connectors are
AASE22000P
colored Red
Top Hoop Sensor
There are 2 LED's on the sensors:
Green means it has power.
Yellow is normally ON, and goes out
when hoop is blocked.
AASE22001P
Bottom Hoop Sensor
The Bottom Sensor
connectors are
colored Blue
A5MO5154
Ball Gate Motor
Normally
4 Ohms
AACB5190A
across the
12 VDC on the Yellow and Blue wires.
Home Sensor
motor.
0 Volts on Blue and White wires when the sensor is open.
4 Volts on Blue and White wires when the sensor is blocked
Rear Section
Front Console
AACE22013P
Power In
from Power
Dist Board
AACB22000A
52
Controller Board