Digital Io Control - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)
Color Transformation
Control Name
ColorMatrixValueInt [B-B]

Digital IO Control

Configure settings for digital input/output.
Notes:
Descriptions of each command can also be found in "DigitalIOControl" (Setting List).
l
The following signals cannot be inverted (LineInverter fixed to 0): TTL In1 (Line4/12-
l
pin), Opt In1 (Line 5/12-pin), TTL In2 (Line 10/AUX), TTL In3 (Line 13/AUX).
Digital IO Control
Name
LineInverter [TTL Out1]
Note: TTL Out1 = Line
1 (12-pin)
LineInverter [TTL Out2]
Note: TTL Out2 = Line
8 (AUX)
LineInverter [TTL Out3]
Note: TTL Out3 = Line
9 (AUX)
LineInverter [TTL Out4]
Note: TTL Out4 = Line
12 (12-pin)
LineInverter
[NANDGate0In1]
Short
Access
ASCII
R/W CMVBB -20000 ~ 20000
Short
Access
ASCII
0: False
R/W LI0
1: True
0: False
R/W LI1
1: True
0: False
R/W LI2
1: True
0: False
R/W LI3
1: True
0: False
R/W ND0INV1
1: True
Default
Values
Value
CMVBB=[Param.]<CR><LF>
CMVBB?<CR><LF>
Specify the ColorMatrix value.
ColorTransformationMode = RGB
ColorTransformationRGBMode=UserCustom
Individually adjust 9 elements of the 3x3 color
matrix (B-B)
Default
Values
Value
0
0
0
0
0
- 96 -
Short ASCII Command List
Example / Description
Example / Description
LI0=[Param.]<CR><LF>
LI0?<CR><LF>
Invert the polarity of the signal
(TTLOut1).
LI1=[Param.]<CR><LF>
LI1?<CR><LF>
Invert the polarity of the signal
(TTLOut2).
LI2=[Param.]<CR><LF>
LI2?<CR><LF>
Invert the polarity of the signal
(TTLOut3).
LI3=[Param.]<CR><LF>
LI3?<CR><LF>
Invert the polarity of the signal
(TTLOut4).
ND0INV1=[Param.]<CR><LF>
ND0INV1?<CR><LF>
Invert the polarity of the signal
(NANDGate0In1).