IAI SW-4000T-MCL User Manual page 68

SW-4000T-MCL User Manual (2.0)
Analog Control Item
AWBAreaWidth
AWBAreaOffsetX
AWBExposureOnce
Status
AWBOnceStatus
BlackLevelSelector
Related Topic:
Black Level
Correction
BlackLevel
GainAuto
AGCReference
Default
Setting Range
Value
- -
- -
- -
0: DigitalAll
1: DigitalRed 0: All
2: DigitalBlue
- 0
0: Off
0: Off
1: Once
30 ~ 95 50
When BalanceWhiteAuto is set to Once, specify the width of the
reference area.
Min: 16(8)*
Max:4096 (2048)*
Step: 16(8)*
*When BinningHorizontal = 2, the value in parenthesis is applicable.
When BalanceWhiteAuto is set to Once, specify the offset of the
reference area.
Min: 0
Max: WidthMax - AWBWidth
Step: 16(8)*
*When BinningHorizontal = 2, the value in parenthesis is applicable.
When BalanceWhiteAuto is set to ExposureOnce, display the status.
1:Succeeded
2:Error1- G image was too bright
3:Error2 - G image was too dark
4:Error3 - Timeout
5:Idle
When BalanceWhiteAuto is set to Once, display the status.
1:Succeeded
2:Error1- G image was too bright
3:Error2 - G image was too dark
4:Error3 - Timeout
5:Idle
Select the black level to configure.
Set the black level value.
All: Min = -133, Max = 255
Red: Min = -64, Max=64
Blue: Min = -64, Max=64
Enable/disable gain auto adjustment.
Note: Once can be set only when IndividualGainMode is set to On.
When set to Once, the automatic adjustment will be performed only once,
and then automatically switched to Off.
Set the target level for AGC. (Unit: %)
- 68 -
Description
Setting List