Analog Control - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)
Acquisition Control
Name
RBExposureInterlocked
ExposureTimeMin
ExposureTimMax
AcquisitionLineRateOption

Analog Control

Configure the analog control setting.
Note: Descriptions of each command can also be found in "AnalogControl" (Setting List).
Analog Control
Access
Name
IndividualGainMode R/W
GainInt[DigitalAll] R/W
GainInt[DigitalRed] R/W
GainInt[DigitalGreen] R/W
Short
Access Values
ASCII
0:Off
R/W EI
1:On
R PEMIN
R PEMAX
0: mode1
R/W LROP
1: mode2
Short
Values
ASCII
0:Off
GM
1:On
GA 100 ~ 800
IndividualGainMode = Off:
40 ~ 400
GAR
IndividualGainMode = On:
100 ~ 1600
IndividualGainMode = Off:
40 ~ 400
GAG
IndividualGainMode = On:
100 ~ 1600
Default
Value
EI=[Param.]<CR><LF>
EI?<CR><LF>
0
Adjust exposure time of the R and B channels
automatically in conjunction with exposure time
of the G channel.
PEMIN?<CR><LF>
- -
Display the minimum exposure time.
PEMAX?<CR><LF>
- -
Display the maximum exposure time.
LROP=[Param.]<CR><LF>
LROP?<CR><LF>
1
Set the AcquisitionLineRateOption. If mode2 is
selected, the maximum line rate is limited.
Default
Value
GM=[Param.]<CR><LF>
GM?<CR><LF>
0
Configure Gain individually when set to On.
GA=[Param.]<CR><LF>
GA?<CR><LF>
-
Set Gain [DigitalAll], when IndividualGainMode
is Off.
GAR=[Param.]<CR><LF>
GAR?<CR><LF>
-
Set Gain[DigitalRed]. The setting range varies
depending on the IndividualGainMode setting.
GAG=[Param.]<CR><LF>
GAG?<CR><LF>
100
Set Gain[DigitalGreen].
- 89 -
Short ASCII Command List
Example / Description
Example / Description