Table of Contents
Advertisement
SW-4000T-MCL User Manual (2.0)
Specifications
Item
Image Sensor
Camera Link Clock
Line Rate
Video S/N ratio
PRNU
DSNU
Gain
Black Level (User Settings)
Image Output
Variable Line Rate
Electronic shutter
Test Pattern
Synchronization
4K line scan CMOS image sensor × 3
Effective Pixels: 4096 pixels × 3 (R, G, B)
Pixel Size: ModeA: 7.5 μm x 7.5 μm, ModeB: 7.5 μm x 10.5 μm
66 Hz - 67.7 kHz
>55 dB (Gain = 0dB) @10bit
Post-correction: within ±1% (during 100% output)
Post-correction: within ±5% (during 0% output)
Analog
AnalogBaseGain: 0dB, 6dB, 12dB
Digital
IndividualGainMode = Off
- Digital All: x1.0 ~ x32.0
- DigitalRed/DigitalBlue:x0.4 ~ x4
IndividualGainMode = ON
- DigitalGreen/DigitalRed/DigitalBlue: x1.0 ~ x64.0
Manual
All: -133 ~ +255 (LSB@12bit)
Red: -64 ~ +64
Blue: -64 ~ +64
Default Setting: Output black level at 0 (33LSB during 10-bit)
Digital Video Output (Camera Link)
Base: RG8 (Default)
Medium: RGB8, RGB10
Full: RGB8
80bit(Deca): RGB8
Supported (for Exposure Mode OFF mode / internal trigger mode or Shutter select mode / internal
trigger mode)
Variable range: 66 Hz to 67.7 kHz
Variable unit: 0.1Hz
The black level may vary with longer line rates, due to the increase in dark currents.
Supported (Exposure Mode: Timed)
Variable Range: 3 ~ 15149.07 us
Variable Unit: 0.01 us
Note: Exposure Offset Duration: -0.85 μs
White, GreyPattern1(Ramp), GreyPattern2(Stripe), ColorBar
Internal
RGB
42.5 / 63.75 / 85 MHz
- 116 -
Miscellaneous
Advertisement
Table of Contents
