IAI SW-4000T-MCL User Manual page 111

SW-4000T-MCL User Manual (2.0)
Correction Control Name
FIRFilterRightRatioInt [Red]
FIRFilterRightRatioI [Green]
FIRFilterRightRatio [Blue]
MEDIANFilterMode [Red]
MEDIANFilterMode [Green]
MEDIANFilterMode [Blue]
NoiseReduction
Short
Access
ASCII
R/W FFRRR -200 ~ 200
R/W FFRRG -200 ~ 200
R/W FFRRB -200 ~ 200
0: Off
R/W MFR
1: On
0: Off
R/W MFG
1: On
0: Off
R/W MFB
1: On
0: Off
1: Level1
R/W NR 2: Level2
3: Level3
4: Level4
Default
Values
Value
0
0
0
0
0
0
0
- 111 -
Short ASCII Command List
Example / Description
FFRRR=[Param.]<CR><LF>
FFRRR?<CR><LF>
Set the coefficient of the right pixel when
FIR Filter for Red is applied.
FFRRG=[Param.]<CR><LF>
FFRRG?<CR><LF>
Set the coefficient of the right pixel when
FIR Filter for Green is applied.
FFRRB=[Param.]<CR><LF>
FFRRB?<CR><LF>
Set the coefficient of the right pixel when
FIR Filter for Blue is applied.
MFR=[Param.]<CR><LF>
MFR?<CR><LF>
Enable / Disable MEDIAN Filter for Red.
MFG=[Param.]<CR><LF>
MFG?<CR><LF>
Enable / Disable MEDIAN Filter for
Green.
MFB=[Param.]<CR><LF>
MFB?<CR><LF>
Enable / Disable MEDIAN Filter for Blue.
NR=[Param.]<CR><LF>
NR?<CR><LF>
Set the noise reduction intensity in 4
levels. Level1 = weak, Level4 = strong.