IAI SW-4000T-MCL User Manual page 81

SW-4000T-MCL User Manual (2.0)
Encoder Control Item
EncoderFilter (cycle)
EncoderStrobe (ns)
Default
Setting Range
Value
0 ~ 15 0
1 ~ 256 1
Apply a low-pass filter to prevent noise on the signal from the rotary
encoder and stabilize the signal for the specified number of cycles.
Note: 10ns/cycle
Set the strobe length of the Trigger signal generated from the rotary
encoder by the number of cycles.
- 81 -
Setting List
Description