Devicecontrol - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)

DeviceControl

Display/configure information related to the device.
DeviceControl Item
DeviceVendorName
DeviceModelName
DeviceManufacturerInfo
DeviceVersion
DeviceFirmwareVersion
DeviceFpgaVersion
DeviceSerialNumber
DeviceUserID
DeviceSFNCVersionMajor
DeviceSFNCVersionMinor
DeviceSFNCVersionSubMinor
DeviceManifestEntrySelector
DeviceTemperatureSelector
DeviceTemperature
DeviceSerialPortSelector
DeviceSerialPortBaudRate
DeviceReset
DeviceScanType
Setting
Default Value
Range
"JAI Ltd.,
-
Japan"
SW-4000T-
-
MCL
"See the
-
possibilities"
- -
- -
- -
Any -
- 2
- 5
- 0
1 1
XML1 -
- -
0:CameraLink
0
(Fixed)
- 1
- -
- 1: Linescan
Display the manufacturer name.
Display the model name.
Display the manufacturer information.
Display the device version.
Display the firmware version.
Display the FPGA version.
Display the device ID.
Set the user ID (16bytes) for the camera.
Display the SFNC Major version.
Display the SFNC Minor version.
Display the SFNC Sub-Minor version.
Display the valid XML file information.
Select the area of the camera's interior where the temperature
is to be measured.
Display the internal temperature (°C) of the device.
Display the serial port's baud rate.
1(0x01): Baud9600
2(0x02): Baud19200
4(0x04): Baud38400
8(0x08): Baud57600
16(0x10): Baud115200
Reset the device.(After the camera receives this command, it
returns an ACK response and executes the reset.)
Display the scan type of the device.
- 63 -
Setting List
Description