Lut Control - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)

LUT Control

Configure LUT settings.
Note: Descriptions of each command can also be found in "LUTControl" (Setting List).
Lut Control Name Access
LUTIndex [Red] R/W
LUTIndex [Green] R/W
LUTIndex [Blue] R/W
LUTValue [Red] R/W
LUTValue [Green] R/W
LUTValue [Blue] R/W
Short
Values
ASCII
LUTIR 0 ~ 256
LUTIG 0 ~ 256
LUTIB 0 ~ 256
LUTR 0 ~ 4095
LUTG 0 ~ 4095
LUTB 0 ~ 4095
Default
Value
LUTIR=[Param.]<CR><LF>
LUTIR?<CR><LF>
0
Set the LUT index table number for the Red
channel.
LUTIG=[Param.]<CR><LF>
LUTIG?<CR><LF>
0
Set the LUT index table number for the
Green channel.
LUTIB=[Param.]<CR><LF>
LUTIB?<CR><LF>
0
Set the LUT index table number for the Blue
channel.
LUTR=[Param.]<CR><LF>
LUTR?<CR><LF>
Set the LUT value for the Red channel.
LUTG=[Param.]<CR><LF>
LUTG?<CR><LF>
Set the LUT value for the Green channel.
LUTB=[Param.]<CR><LF>
LUTB?<CR><LF>
Set the LUT value for the Blue channel.
- 93 -
Short ASCII Command List
Example / Description