Usersetcontrol; Transportlayercontrol - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)

UserSetControl

Configure user settings.
Related Topic: Step 7: Save the Settings
User Set Control Setting
Item Range
UserSetSelector
UserSetLoad
UserSetSave

TransportLayerControl

Display information on transport layer control.
Transport Layer Control Item
ClConfiguration
CameraLinkClockFrequency
SwapBandR
AdditionalInformation
CableEmphasis
Related Topic: ③ Camera
Link Cable
Default
Value
Select the user settings.
0: Default - Invalid when executing UserSetSave
- 0: Default
1: User1
2: User2
3: User3
Read the user settings. When selecting Default for UserSetSelector, the
- -
factory settings are loaded.
Save the current setting values as user settings. Invalid when
- -
UserSetSelector is set to Default.
Setting Default
Range Value
0: Base
1: Medium
0:Base
2: Full (fixed)
4: EightyBit
0: 85MHz
1: 63.75MHz 0: 85MHz
2: 42.5MH
0: Off
0: Off
1: On
0: Off
1: On
1: On
0: Normal
1: Medium 1: Medium
2: Strong
Description
Set the Camera Link configuration.
Set Camera Link clock frequency.
Specify whether to swap Blue and Red to enable support for
connecting a particular grabber board.
Set CableEmphasis. When set to Medium or Strong, you may be
able to extend the camera link cable length.
- 74 -
Setting List
Description