To Use The Shading Correction Function; Black Level Correction - IAI SW-4000T-MCL User Manual

3 cmos prism line scan camera with mini camera link interface

Table of Contents

SW-4000T-MCL User Manual (2.0)

To Use the Shading Correction Function

The function is turned ON/OFF via serial communication. This function is not dependent on the

operation mode but is effective when used during actual use.

Note: You can save the setting, and have it applied whenever the power is subsequently

turned on. For details on saving the setting, see

1. Select the shading correction mode (FlatShading or ColorShading) in

ShadingCorrectionMode.

2. In ShadingMode, select the user area (User1 - 3) where you save the shading correction

data.

Note: You cannot perform calibration when Off is selected.

3. Display a white chart under a uniform light and execute PerformShadingCalibration.

Related Setting Items:

Black level correction is a function for adjusting the setup level. When this function is used, the

following is performed for the gain mode setting.

DigitalAll: Min = -133, Max = 255

DigitalRed: Min = -64, Max=64

DigitalBlue: Min = -64, Max=64

AnalogControl

- 48 -

Step 7: Save the

Settings.

Main Functions

Table of Contents