IAI SW-4000T-MCL User Manual page 88

SW-4000T-MCL User Manual (2.0)
Acquisition Control
Name
ExposureTimeMode
ExposureTime[Common]
ExposureTime
[Red]
ExposureTime
[Green]
ExposureTime
[Blue]
AutoReset
Short
Access Values
ASCII
0:Common
R/W ETM
1:Individual
300 ~ 1514908
R/W PE
Unit: 10ns (100 = 1us)
300 ~ 1514908
R/W PER
Unit: 10ns (100 = 1us)
300 ~ 1514908
R/W PEG
Unit: 10ns (100 = 1us)
300 ~ 1514908
R/W PEB
Unit: 10ns (100 = 1us)
0: Off
R/W ARS
1: On
Default
Value
ETM=[Param.]<CR><LF>
ETM?<CR><LF>
Select the exposure time mode.
0
Common: Set the common value for R, G and
B channels.
Individual: Set the values for the R, G, and B
channels individually
PE=[Param.]<CR><LF>
PE?<CR><LF>
27847
When ExposureTimeMode is set to Common,
set the exposure time in Common mode.
PER=[Param.]<CR><LF>
PER?<CR><LF>
Set the exposure time for the Red channel.
27847
Note: ExposureTimeMode must be set to
Common.
PEG=[Param.]<CR><LF>
PEG?<CR><LF>
Set the exposure time for the Green channel.
27847
Note: ExposureTimeMode must be set to
Common.
PEB=[Param.]<CR><LF>
PEB?<CR><LF>
Set the exposure time for the Blue channel.
27847
Note: ExposureTimeMode must be set to
Common.
ARS=[Param.]<CR><LF>
ARS?<CR><LF>
Set the AutoReset. (When auto reset mode is
0
enabled, LVAL, DVAL, and video are not output
while the trigger input is interrupted. When
resuming trigger input, output of LVAL, DVAL,
and video is resumed.)
- 88 -
Short ASCII Command List
Example / Description