Step 1: Connect Devices - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)
This section describes how to configure various camera settings using serial communication and
specific short ASCII commands. See
available ASCII commands for this camera.
Later sections of the manual refer to GenICam nomenclature for various features/functions and
includes a complete list of all camera settings
The SW-4000T-MCL fully supports applications written using GenICam-based SDKs. The
advantage of this is that programs written using GenICam names can be applied with little or no
modification to control cameras with other GenICam-compliant interfaces and even GenICam-
compliant cameras from different vendors.

Step 1: Connect Devices

① Lens
③ Camera Link Cable
⑤ AUX Cable (10 Pin) (Option)
⑦ AC Adapter (Power Supply)
"Short ASCII Command List" for a complete list of all
(Setting List).
② Mounting
④ Frame Grabber Board
⑥ DC IN / Trigger IN Connection Cable
- 19 -
Preparation