Camera Output Formats - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)
For digital output, set the output source signal using LineSource. Set the source signal in the
same way for NAND Logic (Nand0In1, Nand0In2, Nand1In1, Nand1In2).
Note: For more information on the combinations of source signals and output destinations,
see Basic Function

Camera Output Formats

Related Setting Items:
This camera support stwo output formats (RGB8 and RGB10).
The ClConfiguration and PixelFormat settings on the camera side and the frame grabber board
side must match. For details on frame grabber board settings, refer to the instruction manual of
the board.
ClConfiguration
Matrix.
ImageFormatControl
Base
Medium
Full
80bit (Deca)
- 31 -
Main Functions
PixelFormat
RGB8
RGB8, RGB10
RGB8
RGB8