Exposureactive Function; Test Pattern Function - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)

ExposureActive Function

Related Setting Items:
Perform external output for the timing at which video is accumulated to the sensor.
The signal is output to the DC IN / TRIG IN connector (12-pin round) and the DIGITAL I/O-1 video
output connector (Camera Link).
Example: Output to the DIGITAL I/O-1 video output connector (Camera Link)

Test Pattern Function

Related Setting Items:
You can display the following test patterns (White, GreyPattern1(Ramp), GreyPattern2(Stripe),
ColorBar). Video output is not possible while a test pattern is being executed. This function is not
dependent on gain and offset values that have already been configured, and output is performed
in the following states.
Notes:
Switching for this function is performed via serial communication.
l
This function cannot be saved as the initial state of the camera.
l
AcquisitionControl
ImageFormatControl
- 52 -
Main Functions