Transport Layer Control - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)

Transport Layer Control

Display information on transport layer control.
Note: Descriptions of each command can also be found in "TransportLayerControl" (Setting
List).
Transport Layer Control
Name
ClConfiguration
CameraLinkClockFrequency
SwapBandR
AdditionalInformation
CableEmphasis
Short
Access
ASCII
0: Base
1: Medium
R/W CLCFG
2: Full
4: Eighty Bit
0: 85MHz
R/W CLCF 1: 63.75MHz
2: 42.5MH
0: Off
R/W SWBR
1: On
0: Off
R/W ADDI
1: On
0: Normal
R/W SCB 1: Medium
2: Strong
Default
Values
Value
0
0
0
1
1
- 101 -
Short ASCII Command List
Example / Description
CLCFG=[Param.]<CR><LF>
CLCFG?<CR><LF>
Set the Camera Link configuration.
CLCF=[Param.]<CR><LF>
CLCF?<CR><LF>
Set Camera Link clock frequency.
SWBR=[Param.]<CR><LF>
SWBR?<CR><LF>
Swap the output of B, R.
ADDI=[Param.]<CR><LF>
ADDI?<CR><LF>
Add additional information during
LVAL Low period.
SCB=[Param.]<CR><LF>
SCB?<CR><LF>
Set cableEmphasis. When set to
Medium or Strong, you may be able to
extend the camera link cable length.