Safety Considerations; Electrostatic Discharge - HPE ProLiant DL345 Gen11 Service And Maintenance Manual

Riser board replacement Riser board replacement
Optical drive replacement Optical drive replacement
Drive backplane replacement Drive backplane replacement
Removing and replacing the OCP NIC 3.0 adapter Removing and replacing the OCP NIC 3.0 adapter
Removing and replacing the chassis intrusion detection switch Removing and replacing the chassis intrusion detection switch
Removing and replacing the internal USB device Removing and replacing the internal USB device
Removing the boot device security cover from the NS204i-u + secondary low-profile riser cage Removing the boot device security cover from the NS204i-u + secondary low-profile riser cage
HPE NS204i Boot Device replacement HPE NS204i Boot Device replacement
Heatsink replacement Heatsink replacement
Processor replacement Processor replacement
System board assembly replacement System board assembly replacement
System battery replacement System battery replacement

Safety considerations

Safety considerations
Before performing service procedures, review all the safety information.

Electrostatic discharge

Symbols on equipment
Rack warnings and cautions
Server warnings and cautions
Subtopics Subtopics
Electrostatic discharge Electrostatic discharge
Symbols on equipment Symbols on equipment
Rack warnings and cautions Rack warnings and cautions
Server warnings and cautions Server warnings and cautions
Electrostatic discharge Electrostatic discharge
Be aware of the precautions you must follow when setting up the system or handling components. A discharge of static electricity from a
finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy
of the system or component.
To prevent electrostatic damage:
Avoid hand contact by transporting and storing products in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 37