Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the universal media bay cage
Removing and replacing the universal media bay cage
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
T-15 Torx screwdriver
Procedure
Procedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. If installed, remove all drives from the 2 SFF stacked drive cage.
4. Power down the server.
5. If installed, open the cable management arm.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
101