Table of Contents
Advertisement
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the LFF drive box 1 blank
Removing and replacing the LFF drive box 1 blank
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a spudger or any small prying tool available.
About this task
About this task
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
CAUTION:
either a component or a blank.
Procedure
Procedure
1. If installed, remove the front bezel .
2. Power down the server.
3. If installed, open the cable management arm.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
70
Advertisement
Table of Contents
