Removal And Replacement Procedures; Required Tools; Safety Considerations; Preventing Electrostatic Discharge - HPE Apollo 4200 Gen10 Plus Maintenance And Service Manual

Table of Contents

Not shown.

Removal and replacement procedures

You need the following items for some procedures:

T-10 Torx screwdriver

T-15 Torx screwdriver

T-25 Torx screwdriver

Flathead screwdriver (for removing the front I/O board)

Before performing service procedures, review all the safety information.

To prevent damaging the system, be aware of the precautions you must follow when setting up the system or handling parts. A

discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of

damage may reduce the life expectancy of the device.

Procedure

Avoid hand contact by transporting and storing products in static-safe containers.

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

Place parts on a grounded surface before removing them from their containers.

Avoid touching pins, leads, or circuitry.

Always be properly grounded when touching a static-sensitive component or assembly.

The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions.

This symbol indicates Hewlett Packard Enterprise systems and peripherals that contain

assemblies and components that are sensitive to electrostatic discharge. Carefully observe the

precautions and recommended procedures in this document to prevent component damage from

static electricity.

HPE Apollo 4200 Gen10 Plus Server Maintenance and Service Guide

Table of Contents