Table of Contents
Advertisement
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing a hot-plug SAS, SATA or NVMe drive
Removing and replacing a hot-plug SAS, SATA or NVMe drive
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Procedure
Procedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. Observe the drive LED status and determine if the drive can be removed.
4. Remove the drive.
LFF drive
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
78
Advertisement
Table of Contents
