Table of Contents
Advertisement
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the fan cage.
9. Remove the midwall bracket .
10. Disconnect the SATA-power Y-cable from the optical drive .
11. Remove the screw (callout 1), and then remove the optical drive from the universal media bay (callout 2).
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
155
Advertisement
Table of Contents
