HPE ProLiant DL345 Gen11 Service And Maintenance Manual page 176

10. Remove the OCP NIC 3.0 adapter:
a. Rotate the locking pin to the open (vertical) position (callout 1).
b. Slide the adapter out of the bay (callout 2).
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the chassis intrusion detection switch Removing and replacing the chassis intrusion detection switch
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 176