Table of Contents
Advertisement
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Do one of the following:
a. Remove the air baffle .
b. Remove the midplane drive cage .
9. Remove the rear 4 LFF drive cage .
10. Remove the riser cage.
11. Remove the expansion card .
12. Remove the riser board.
Retain all screws. These screws will be used to secure the new riser board spare.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide
140
Advertisement
Table of Contents
